Roller manufacturers who have transitioned to CHT’s flowable RTV-2 silicone elastomers have experienced many process advantages. CHT’s liquid silicones can be pumped at much lower pressures and time is reduced when filling moulds compared to using gum stock or paste materials.
Additionally, CHT’s liquid silicones are easily processed when used with sleeves or in applications requiring thin roll coats. These silicones also rebound instantaneously and do not take a set if the proper cure profile is followed.
Features and Benefits of CHT’s silicone solutions:
Applications benefitting from CHT’s silicones include:
Finding the right silicone for your application is not limited to CHT’s product portfolio. Our technical team will partner with you to either modify specifications in a current product or custom formulate a new one to meet your exact requirements.
For technical assistance or sample requests, please visit our contact page.
|ALPATEC 5624 BEIGE||1 part textile coating|
|KÖRAFORM A 50||2 part casting compound|
|KÖRAFORM A 50 SCHWARZ||2 part casting compound|
|KÖRAFORM A 50 T||2 part casting compound|
|QM 260||2 part moldmaking material|
|QM 264||2 part moldmaking material|
|QM 270||2 part moldmaking material|
|QM 270 Green||2 part moldmaking material|
|QM 280||2 part moldmaking material|
|QSil 244||2 part encapsulation and potting silicone|
|QSil 266||2 part encapsulation and potting silicone|
|QSil 7720||2 part potting material|
|QSil 7750||Thermally conductive material|